A Cottage Chair Makeover Story: Yes, You *Can* Paint Fabric!

Edited 8/2/09 to add: Since I'm out of town and don't have a recent Make Your Monday project to share this week, I'm including this project in the Make Your Monday link event.

n your thrifting adventures, have you ever run across a perfectly well formed, good boned, sturdy upholstered piece at a great price...but you didn't buy it? Was it because you didn't like the upholstery and you thought you didn't have the skills to reupholster it yourself? Or maybe you knew it wasn't yet in your budget to higher a professional to do it for you?

Here is an alternative that can work for some low nap fabric: Paint it! Yes, you really can! And you don't have to purchase those expensive upholstery spray paints that come in limited colors, either. Just use a brush and a can of paint in whatever color you like.

I found four of the chairs above at Goodwill a couple of years ago. Obviously, they were from the 70's. (They came with the small, sturdy but beaten up dining room table that I turned into a large coffee table). I paid just $20 for the table and four chairs! I loved the form of the chairs but hated the color of the cushions. Originally, it didn't even occur to me to paint them and so I just stuck the chairs in the garage until I could figure out what to do. Then I came across a discussion in a decorating forum and someone there had actually painted their entire sofa. It looked great...it looked like leather! I was inspired and thought that if someone can paint their whole sofa, then I could try painting my chair cushions. If it didn't work out, I could always recover them down the road - and anything would be better than harvest gold, right?

The original fabric was velour, I do believe. (I am challenged when it comes to knowing fabric types so I apologize if there is another name for this.) As I mentioned, smooth, low nap fabrics work best for this project.



I made sure that the fabric was clean and dry before I began. Then, with a brush and a can of interior latex satin paint (Olympic Premium, "Dark Granite" is the name of the color I used), I started painting. I started with the edges, making sure I pulled back the decorative cording on the cushion so that I could paint in the the grooves. The first coat probably won't cover well and will look absolutely hideous. If you try this, you will want to throw out your furniture project at this point. Ah, but please don't! It gets better!

I let the first coat dry completely. It took a few days because the first coat really gets absorbed into the fabric. When it was completely dry, I sanded it well with fine sandpaper. This step is necessary because the paint raises the fibers in the fabric and it will feel rough to the touch. I sanded the fabric smooth, wiped it down, and then applied my second coat. It was the same process...I let it dry for a few days and then sanded and repeated. I believe I painted a total of four coats. The final coat did not require sanding because the fabric was completely sealed by the first layers of paint and no longer was rough to the touch.



The result was a chair cushion that looked like soft vinyl or leather. This "finish" can be cleaned easily. Just wipe it with a damp cloth!



Or you can bring it up a notch and even stencil something pretty on the seat. I didn't but I just might in the future. I think it would look great! The photo below shows the nice, soft sheen that a satin paint finish produces.



I painted the rest of the chair as well. I "distressed" it by gently brushing some of the edges of the chair with brown paint. Since this chair was photographed a few weeks ago, I've repainted the frame in a solid white as I decided I wanted it to look a little less distressed. I believe my reasoning behind brushing on the brown paint on the edges was to paint over it again with white and then sand back down lightly to the dark brown. But solid white looks just fine. This chair and another just like it will go in my craft studio.



While I don't think I'd be brave enough to paint an entire couch, I'm glad that attempted chair cushions at least. To me, they look a so much better! And we have more room in our garage now!

Sadly, my memory card for my camera just died yesterday. I had a camera full of "before" photos of various studio accessories. And the photos of my youngest child's first missing top tooth :( Hopefully we'll get a new card soon so that I can share the other projects I've been working on. Until then, I'll let you know that my farm style craft table is completed and ready to prime and paint - hubs did a fabulous job! The steps in the studio are also painted a deep chocolate brown and just need a little touch up work. I have another table that I need to start sanding in preparation for paint as well. Three more major pieces of furniture for my studio need to be built and/or made over: a large L-shaped unit, the shelving unit that will sit on top of it, and the makeover piece is a large cubby style system. So much to do, but I will be thrilled to finally have my own space to create!

{Note: The discussion forum where I originally found the instructions for this project was on the HGTV website. The instructions have recently been brought up in the forum again and can be found here. I basically followed these instructions with the exception of using paste wax as the final step.}